Part No | Category | Description | QTY | RFQ |
---|---|---|---|---|
HGR-67-005-C | power transmission | ironhorse heavy-duty helical gearbox, 5:1 ratio, 182/4tc-face input, inline, 1.375in diameter output shaft, nominal 5hp at 1.0 sf, 2710 lb-in mechanical output torque, type-67 frame, cast iron housing, foot mount. | 1910 | RFQ |
MTAP-SHROUD-440 | motors | ironhorse fan shroud, replacement. for use with 444, 445, and 447 frame ironhorse premium efficiency mtcp series motors. | 1580 | RFQ |
MTAP-FAN-320 | motors | ironhorse mtcp series main cooling fan, replacement. for use with 324 and 326 frame ironhorse premium efficiency mtcp series motors. | 2178 | RFQ |
MTADP-CFACE-180TC | motors | ironhorse c-flange, replacement. for use with 182t and 184t frame ironhorse mtdp series motors. | 2778 | RFQ |
WG-206-040-R | power transmission | ironhorse heavy-duty worm gearbox, 40:1 ratio, 56c-face input, right hand, 1in diameter output shaft, nominal 0.5hp at 1.0 sf, 1120 lb-in mechanical output torque, 2-1/16in center distance, cast iron housing, tapped-base mount. | 2909 | RFQ |
WGA-63M-100-H1 | igus polymer bearings | ironhorse medium-duty worm gearbox, 100:1 ratio, 56c-face input, hollow, 1.125in diameter output shaft, nominal 0.5hp at 1.0 sf, 1035 lb-in mechanical output torque, 63mm center distance, cast aluminum housing, top and bottom mount. | 2725 | RFQ |
WG-325-030-HA | power transmission | ironhorse heavy-duty worm gearbox, 30:1 ratio, 56c-face input, hollow, 1.937in diameter output shaft, nominal 2hp at 1.0 sf, 3045 lb-in mechanical output torque, 3-1/4in center distance, cast iron housing, tapped-base mount. | 1849 | RFQ |
SMR5-CF | general purpose aluminum worm gearboxes | ironhorse screw conveyor flange, for use with size 5 shaft mount gearboxes. mounting hardware included. | 1702 | RFQ |
HBR-47-010-B | power transmission | ironhorse heavy-duty helical bevel gearbox, 10:1 ratio, 143/5tc-face input, hollow, 1.375in diameter output shaft, nominal 2hp at 3.23 sf, 2097 lb-in mechanical output torque, type-47 frame, cast iron housing, vertical or horizontal mount. | 1466 | RFQ |
WG-237-020-H | power transmission | ironhorse heavy-duty worm gearbox, 20:1 ratio, 56c-face input, hollow, 1.25in diameter output shaft, nominal 1hp at 1.0 sf, 1195 lb-in mechanical output torque, 2-3/8in center distance, cast iron housing, tapped-base mount. | 2391 | RFQ |
SMR2-TBK-31 | general purpose gearbox accessories | ironhorse tapered bushing kit, 1-15/16in bore. for use with size 2 shaft mount gearboxes. includes fastening bolts and a full length shaft key. | 1194 | RFQ |
MTAF2-CAP-21 | motors | ironhorse run capacitor, replacement. for use with 3hp 1800rpm ironhorse mtf2 series 1-phase ac motors. not compatible with mtf series motors. | 1708 | RFQ |
WG-206-005-R | power transmission | ironhorse heavy-duty worm gearbox, 5:1 ratio, 56c-face input, right hand, 1in diameter output shaft, nominal 2hp at 1.0 sf, 925 lb-in mechanical output torque, 2-1/16in center distance, cast iron housing, tapped-base mount. | 2035 | RFQ |
MTGP-P14-1L026 | motors | ironhorse parallel shaft dc gear motor, 1/7hp, 90 vdc, 26rpm, 280 lb-in full load torque, 1.58 fla, 69:1 ratio, 5/8in shaft diameter. | 2315 | RFQ |
WG-237-020-R | power transmission | ironhorse heavy-duty worm gearbox, 20:1 ratio, 56c-face input, right hand, 1.125in diameter output shaft, nominal 1hp at 1.0 sf, 1195 lb-in mechanical output torque, 2-3/8in center distance, cast iron housing, tapped-base mount. | 1873 | RFQ |
HBR-67-DS | linear shafts | ironhorse double output shaft, 1.500in. for use with hbr-67 series gearboxes. (4) keys, (1) spacer and (1) retaining ring included. | 2338 | RFQ |
WG-262-010-L | power transmission | ironhorse heavy-duty worm gearbox, 10:1 ratio, 182tc-face input, left hand, 1.125in diameter output shaft, nominal 2hp at 1.0 sf, 1445 lb-in mechanical output torque, 2-5/8in center distance, cast iron housing, tapped-base mount. | 1116 | RFQ |
HGR-37-005-B | power transmission | ironhorse heavy-duty helical gearbox, 5:1 ratio, 145tc-face input, inline, 1in diameter output shaft, nominal 2hp at 1.0 sf, 970 lb-in mechanical output torque, type-37 frame, cast iron housing, foot mount. | 1310 | RFQ |
GSD1-12-20C | drives | ironhorse dc drive, 12 vdc input, 1-phase, 1/25 to 1/4 hp 12 vdc, 20a max output current, open frame, pwm output, 0-10 vdc or potentiometer input. | 1335 | RFQ |
WG-325-030-HB | power transmission | ironhorse heavy-duty worm gearbox, 30:1 ratio, 145tc-face input, hollow, 1.937in diameter output shaft, nominal 2hp at 1.0 sf, 3045 lb-in mechanical output torque, 3-1/4in center distance, cast iron housing, tapped-base mount. | 2591 | RFQ |
MTGR-P20-1K075 | motors | ironhorse right angle single shaft dc gear motor, 1/5hp, 24 vdc, 75rpm, 137 lb-in full load torque, 8.72 fla, 23:1 ratio, 5/8in shaft diameter. | 1398 | RFQ |
MTAF2-FAN-180 | motors | ironhorse mtf2 series main cooling fan, replacement. for use with 182t and 184t frame ironhorse mtf2 series motors. | 2950 | RFQ |
MTAP-SHROUD-320 | motors | ironhorse fan shroud, replacement. for use with 324 and 326 frame ironhorse premium efficiency mtcp series motors. | 1378 | RFQ |
WG-206-010-L | power transmission | ironhorse heavy-duty worm gearbox, 10:1 ratio, 56c-face input, left hand, 1in diameter output shaft, nominal 1.5hp at 1.0 sf, 935 lb-in mechanical output torque, 2-1/16in center distance, cast iron housing, tapped-base mount. | 2741 | RFQ |
HGR-77-040-C | power transmission | ironhorse heavy-duty helical gearbox, 40:1 ratio, 182tc-face input, inline, 1.625in diameter output shaft, nominal 3hp at 1.0 sf, 6640 lb-in mechanical output torque, type-77 frame, cast iron housing, foot mount. | 2075 | RFQ |
MTR2-P33-3BD36 | motors | ironhorse standard performance ac induction motor, general purpose and inverter duty, 1/3hp, 3-phase, 230/460 vac, 3600rpm, tefc, 56c frame, rolled steel, rigid base/c-face mount. | 1236 | RFQ |
MTCP-150-3BD18 | motors | ironhorse premium efficiency ac induction motor, general purpose, 150hp, 3-phase, 208-230/460 vac, 1800rpm, tefc, 445t frame, cast iron, rigid base only mount. | 2032 | RFQ |
MTPM-P75-1M18 | motors | ironhorse standard performance dc permanent magnet motor, scr-pwm rated, 3/4hp, 180 vdc, 1800rpm, tefc, 56c frame, rolled steel, removable base/c-face mount. replacement brushes included. | 2969 | RFQ |
GSD8-240-10C-D | drives and soft starters | ironhorse gsd8 series dc digital drive, 120/240 vac, 1-phase, 1hp at 90 vdc and 2hp at 180 vdc, 10a, nema 4x, 1/4 din mount, field-install reverse, high-speed pulse input, scr output. | 2547 | RFQ |
WG-206-005-H | power transmission | ironhorse heavy-duty worm gearbox, 5:1 ratio, 56c-face input, hollow, 1.125in diameter output shaft, nominal 2hp at 1.0 sf, 925 lb-in mechanical output torque, 2-1/16in center distance, cast iron housing, tapped-base mount. | 2277 | RFQ |
MTSS-P75-3BD36 | motors | ironhorse standard performance ac induction motor, general purpose, 3/4hp, 3-phase, 208-230/460 vac, 3600rpm, tefc, 56c frame, stainless steel, rigid base/c-face mount. cable gland included. | 1693 | RFQ |
SMR3-25 | igus polymer bearings | ironhorse heavy-duty shaft mounted gearbox, 25:1 ratio, 1-1/4in shaft input, tapered bore, maximum motor 10hp, 2-3/16in maximum output shaft diameter, size 3 frame, cast iron housing. | 1078 | RFQ |
MTAP2-SHROUD-250 | motors | ironhorse fan shroud, replacement. for use with 254 and 256 frame ironhorse premium efficiency mtcp2 series motors. not compatible with mtc or mtcp series motors. | 2440 | RFQ |
HGR-37-020-A | power transmission | ironhorse heavy-duty helical gearbox, 20:1 ratio, 56c-face input, inline, 1in diameter output shaft, nominal 1hp at 1.0 sf, 1670 lb-in mechanical output torque, type-37 frame, cast iron housing, foot mount. | 2733 | RFQ |
MTA-CAP-10 | motors | ironhorse start capacitor, replacement. for use with 1/3hp 3600rpm ironhorse mtr2 series 1-phase ac motors. not compatible with mtr series motors. | 1665 | RFQ |
HGR-47-060-A | power transmission | ironhorse heavy-duty helical gearbox, 60:1 ratio, 56c-face input, inline, 1.25in diameter output shaft, nominal 1hp at 1.0 sf, 2830 lb-in mechanical output torque, type-47 frame, cast iron housing, foot mount. | 2241 | RFQ |
MTPM-BRUSH-1 | motors | ironhorse dc motor brushes, replacement. package of 2. for use with ironhorse 1/3hp - 1hp mtpm series permanent magnet dc motors. each motor is shipped with a set of brushes installed and an extra set shipped loose. | 2996 | RFQ |
MTA2-FAN-56 | motors | ironhorse mtr2 series main cooling fan, replacement. for use with 56c frame ironhorse mtr2 series motors. not compatible with mtr series. | 1131 | RFQ |
WGA-50M-ACC2 | general purpose gearbox accessories | ironhorse torque arm, for use with aluminum wga-50m series gearboxes. mounting hardware included. | 2684 | RFQ |
WGA-50M-ACC4 | linear shafts | ironhorse double output shaft, for use with aluminum wga-50m series gearboxes. (4) keys, (2) spacers and (2) retaining rings included. | 1152 | RFQ |
MTAP-FAN-280 | motors | ironhorse mtcp series main cooling fan, replacement. for use with 284 and 286 frame ironhorse premium efficiency mtcp series motors. | 1282 | RFQ |
MTAR-JBOX-56 | motors | ironhorse junction box, replacement. for use with 56c frame ironhorse mtr series motors. not compatible with mtr2 series motors. | 1051 | RFQ |
SMR5-CDS-32 | general purpose aluminum worm gearboxes | ironhorse screw conveyor drive shaft, 2in. for use with size 5 shaft mount gearboxes. mounting hardware included. | 1117 | RFQ |
MTPM-BRUSH-6 | motors | ironhorse dc motor brushes, replacement. package of 2. for use with ironhorse 1/7hp or 1/8hp 90 vdc or 180 vdc mtpm, mtgr, and mtgp series permanent magnet dc motors and gearmotors. (2) brush caps included. | 2952 | RFQ |
MTCP2-040-3BD18 | motors | ironhorse premium efficiency ac induction motor, general purpose and inverter duty, 40hp, 3-phase, 230/460 vac, suitable for 208 vac at 60 hz, 1800rpm, tefc, 324t frame, cast iron, rigid base only mount. | 2641 | RFQ |
HBR-77-120-B | power transmission | ironhorse heavy-duty helical bevel gearbox, 120:1 ratio, 143tc-face input, hollow, 2in diameter output shaft, nominal 1hp at 3.42 sf, 12480 lb-in mechanical output torque, type-77 frame, cast iron housing, vertical or horizontal mount. | 1372 | RFQ |
GSD7-120-10CR30 | drives and soft starters | ironhorse gsd7 series dc reversing drive, 120 vac, 1-phase, 1/8 to 1hp at 90 vdc, 10a, open frame, panel mount, built-in reverse, maximum 30 reverses/minute, potentiometer input, scr output. | 1703 | RFQ |
MTADP-OEB-210 | motors | ironhorse opposite drive end endbell, replacement. for use with 213t and 215t frame ironhorse mtdp series motors. | 2974 | RFQ |
MTA-CAP-08 | motors | ironhorse start capacitor, replacement. for use with 1-1/2hp 3600rpm ironhorse mtr series 1-phase ac motors. not compatible with mtr2 series motors. | 1001 | RFQ |
MTAF2-CSW-06 | motors | ironhorse centrifugal switch, replacement. for use with 215t frame ironhorse mtf2 series 1-phase ac motors. not compatible with mtf series motors. | 2281 | RFQ |
WGA-50M-040-H1 | general purpose gearbox accessories | ironhorse medium-duty worm gearbox, 40:1 ratio, 56c-face input, hollow, 1in diameter output shaft, nominal 0.75hp at 1.0 sf, 664 lb-in mechanical output torque, 50mm center distance, cast aluminum housing, top and bottom mount. | 2031 | RFQ |
HGR-37-030-B | power transmission | ironhorse heavy-duty helical gearbox, 30:1 ratio, 145tc-face input, inline, 1in diameter output shaft, nominal 2hp at 1.0 sf, 1770 lb-in mechanical output torque, type-37 frame, cast iron housing, foot mount. | 1420 | RFQ |
HBR-37-DS | linear shafts | ironhorse double output shaft, 1.000in. for use with hbr-37 series gearboxes. (4) keys, (1) spacer and (1) retaining ring included. | 2994 | RFQ |
HGR-37-030-A | power transmission | ironhorse heavy-duty helical gearbox, 30:1 ratio, 56c-face input, inline, 1in diameter output shaft, nominal 1.5hp at 1.0 sf, 1770 lb-in mechanical output torque, type-37 frame, cast iron housing, foot mount. | 2980 | RFQ |
MTAP2-SHROUD-449 | motors | ironhorse fan shroud, replacement. for use with 449t frame ironhorse premium efficiency mtcp2 series motors. not compatible with mtc or mtcp series motors. | 1037 | RFQ |
WG-262-015-R | power transmission | ironhorse heavy-duty worm gearbox, 15:1 ratio, 56c-face input, right hand, 1.125in diameter output shaft, nominal 2hp at 1.0 sf, 1577 lb-in mechanical output torque, 2-5/8in center distance, cast iron housing, tapped-base mount. | 2637 | RFQ |
SMR4-CDS-32 | general purpose aluminum worm gearboxes | ironhorse screw conveyor drive shaft, 2in. for use with size 4 shaft mount gearboxes. mounting hardware included. | 2063 | RFQ |
MTPM-1P5-1L18 | motors | ironhorse standard performance dc permanent magnet motor, scr-pwm rated, 1-1/2hp, 90 vdc, 1800rpm, tefc, 56c frame, rolled steel, removable base/c-face mount. replacement brushes included. | 1564 | RFQ |
MTCP-003-3BD18 | motors | ironhorse premium efficiency ac induction motor, general purpose, 3hp, 3-phase, 208-230/460 vac, 1800rpm, tefc, 182t frame, cast iron, rigid base only mount. | 1060 | RFQ |
MTAP2-JBOX-440 | motors | ironhorse junction box, replacement. for use with 444, 445 and 447 frame ironhorse premium efficiency mtcp2 series motors. not compatible with mtc or mtcp series motors. | 1964 | RFQ |
HBR-77-040-D | power transmission | ironhorse heavy-duty helical bevel gearbox, 40:1 ratio, 213tc-face input, hollow, 2in diameter output shaft, nominal 7.5hp at 1.23 sf, 11955 lb-in mechanical output torque, type-77 frame, cast iron housing, vertical or horizontal mount. | 1022 | RFQ |
GSD7-240-10CR30 | drives and soft starters | ironhorse gsd7 series dc reversing drive, 240 vac, 1-phase, 1/4 to 2hp at 180 vdc, 10a, open frame, panel mount, built-in reverse, maximum 30 reverses/minute, potentiometer input, scr output. | 1745 | RFQ |
MTCP2-125-3BD18 | motors | ironhorse premium efficiency ac induction motor, general purpose and inverter duty, 125hp, 3-phase, 230/460 vac, suitable for 208 vac at 60 hz, 1800rpm, tefc, 444t frame, cast iron, rigid base only mount. | 2056 | RFQ |
WG-325-010-DC | power transmission | ironhorse heavy-duty worm gearbox, 10:1 ratio, 182/4tc-face input, dual, 1.375in diameter output shaft, nominal 5hp at 1.0 sf, 2419 lb-in mechanical output torque, 3-1/4in center distance, cast iron housing, tapped-base mount. | 1761 | RFQ |
MTCP-060-3BD18C | motors | ironhorse premium efficiency ac induction motor, general purpose, 60hp, 3-phase, 208-230/460 vac, 1800rpm, tefc, 364tc frame, cast iron, rigid base/c-face mount. | 1460 | RFQ |
MTADP-JBOX-210 | motors | ironhorse junction box, replacement. for use with 213t and 215t frame ironhorse mtdp series motors. | 1648 | RFQ |
MTCP-125-3BD18 | motors | ironhorse premium efficiency ac induction motor, general purpose, 125hp, 3-phase, 208-230/460 vac, 1800rpm, tefc, 444t frame, cast iron, rigid base only mount. | 2538 | RFQ |
WG-175-060-R | power transmission | ironhorse heavy-duty worm gearbox, 60:1 ratio, 56c-face input, right hand, 0.875in diameter output shaft, nominal 0.25hp at 1.0 sf, 433 lb-in mechanical output torque, 1-3/4in center distance, cast iron housing, tapped-base mount. | 1406 | RFQ |
MTAP2-JBOX-140 | motors | ironhorse junction box, replacement. for use with 143 and 145 frame ironhorse premium efficiency mtcp2 series motors. not compatible with mtc or mtcp series motors. | 1892 | RFQ |
HBR-87-020-E | power transmission | ironhorse heavy-duty helical bevel gearbox, 20:1 ratio, 254/6tc-face input, hollow, 2.375in diameter output shaft, nominal 20hp at 1.29 sf, 17650 lb-in mechanical output torque, type-87 frame, cast iron housing, vertical or horizontal mount. | 2349 | RFQ |
MTAP-CFACE-180TC | motors | ironhorse c-flange, for use with 182t and 184t frame ironhorse premium efficiency mtcp series motors. mounting hardware included. replaces drive end bell, field install. | 2432 | RFQ |
WG-206-060-L | power transmission | ironhorse heavy-duty worm gearbox, 60:1 ratio, 56c-face input, left hand, 1in diameter output shaft, nominal 0.33hp at 1.0 sf, 750 lb-in mechanical output torque, 2-1/16in center distance, cast iron housing, tapped-base mount. | 2890 | RFQ |
WGA-75M-060-H1 | general purpose gearbox accessories | ironhorse medium-duty worm gearbox, 60:1 ratio, 56c-face input, hollow, 1.25in diameter output shaft, nominal 1hp at 1.0 sf, 1770 lb-in mechanical output torque, 75mm center distance, cast aluminum housing, top and bottom mount. | 1466 | RFQ |
HGR-87-005-E | power transmission | ironhorse heavy-duty helical gearbox, 5:1 ratio, 254/6tc-face input, inline, 2.125in diameter output shaft, nominal 20hp at 1.0 sf, 6120 lb-in mechanical output torque, type-87 frame, cast iron housing, foot mount. | 1063 | RFQ |
MTADP-CDR-320 | motors | ironhorse current diverter ring, for use with 324t and 326t frame drill and tap motors. mtdp series motors are drilled and tapped for mounting current diverter rings, others will require drilling and tapping to mount. | 1442 | RFQ |
MTR2-P75-3BD18 | motors | ironhorse standard performance ac induction motor, general purpose and inverter duty, 3/4hp, 3-phase, 230/460 vac, 1800rpm, tefc, 56c frame, rolled steel, rigid base/c-face mount. | 2915 | RFQ |
MTGP-P06-1J097 | motors | ironhorse parallel shaft dc gear motor, 1/16hp, 12 vdc, 97rpm, 36 lb-in full load torque, 5.68 fla, 26:1 ratio, 5/16in shaft diameter. | 2183 | RFQ |
MTDP-002-3BD18 | motors | ironhorse premium efficiency ac induction motor, inverter duty, 2hp, 3-phase, 208-230/460 vac, 1800rpm, odp, 145t frame, rolled steel, rigid base only mount. | 2079 | RFQ |
WG-262-020-L | power transmission | ironhorse heavy-duty worm gearbox, 20:1 ratio, 56c-face input, left hand, 1.125in diameter output shaft, nominal 1.5hp at 1.0 sf, 1563 lb-in mechanical output torque, 2-5/8in center distance, cast iron housing, tapped-base mount. | 1909 | RFQ |
WG-175-020-R | power transmission | ironhorse heavy-duty worm gearbox, 20:1 ratio, 56c-face input, right hand, 0.875in diameter output shaft, nominal 0.75hp at 1.0 sf, 737 lb-in mechanical output torque, 1-3/4in center distance, cast iron housing, tapped-base mount. | 2573 | RFQ |
WGA-40M-100-H1 | igus polymer bearings | ironhorse medium-duty worm gearbox, 100:1 ratio, 56c-face input, hollow, 0.75in diameter output shaft, nominal 0.12hp at 1.0 sf, 257 lb-in mechanical output torque, 40mm center distance, cast aluminum housing, top and bottom mount. | 2325 | RFQ |
MTSS-002-3BD18 | motors | ironhorse standard performance ac induction motor, general purpose, 2hp, 3-phase, 208-230/460 vac, 1800rpm, tefc, 56c frame, stainless steel, rigid base/c-face mount. cable gland included. | 2883 | RFQ |
MTAP-FAN-250-2 | motors | ironhorse mtcp series main cooling fan, replacement. for use with 2-pole 254 and 256 frame ironhorse premium efficiency mtcp series motors. | 1851 | RFQ |
HGR-87-020-D | power transmission | ironhorse heavy-duty helical gearbox, 20:1 ratio, 213/5tc-face input, inline, 2.125in diameter output shaft, nominal 10hp at 1.0 sf, 9915 lb-in mechanical output torque, type-87 frame, cast iron housing, foot mount. | 2513 | RFQ |
MTAR-SHROUD-56 | motors | ironhorse fan shroud, replacement. for use with 56c frame ironhorse mtr series motors. not compatible with mtr2 series motors. | 2251 | RFQ |
HBR-87-060-D | power transmission | ironhorse heavy-duty helical bevel gearbox, 60:1 ratio, 213/5tc-face input, hollow, 2.375in diameter output shaft, nominal 10hp at 1.11 sf, 22270 lb-in mechanical output torque, type-87 frame, cast iron housing, vertical or horizontal mount. | 2689 | RFQ |
MTAP-SHROUD-400 | motors | ironhorse fan shroud, replacement. for use with 405 frame ironhorse premium efficiency mtcp series motors. | 1274 | RFQ |
HGR-87-005-D | power transmission | ironhorse heavy-duty helical gearbox, 5:1 ratio, 213/5tc-face input, inline, 2.125in diameter output shaft, nominal 10hp at 1.0 sf, 6120 lb-in mechanical output torque, type-87 frame, cast iron housing, foot mount. | 2679 | RFQ |
MTAP2-CFACE-250TC | motors | ironhorse c-flange, replacement. for use with 254t and 256t frame ironhorse premium efficiency mtcp2 series motors. mounting hardware included. replaces drive end bell, field install. not compatible with mtc or mtcp series motors. | 1640 | RFQ |
MTAP-SHROUD-180 | motors | ironhorse fan shroud, replacement. for use with 182 and 184 frame ironhorse premium efficiency mtcp series motors. | 1519 | RFQ |
If you have more than one item,upload your spreadsheet here.
Guaranteed On - Time Delivery |
|
Customized & User-Friendly Database |
|
Over 5100 Manufacturers |
|
Competitive Prices |
|
Scheduling Flexibility |
|
Complete Purchasing Solutions |
We hope that you will visit us again the next time you need industrial parts and make us your strategic purchasing partner.
Request for Quote